Jr.BOM Engineer
Preamble: Unistring Tech Solutions presents a unique opportunity through its Knowledge and Skills Enhancement Initiative. By offering essential video content for training materials, it enables individuals to grab internship opportunities.
Disclaimer: The role and responsibilities mentioned in the below Job Description are and indicative. Based on the performance, there may be a change as per the requirements.
Note: Responsibilities and Assessment Questions can be found after video content.
Skill and Knowledge Elements
Responsibilities:
PCB BOM Team
1.Identification of Components.
2.BOM Packing as per defined process.
3.Confirmation of existing BOM availability of requested.
4.Planning and execution of BOM packing and vendor communication.
5.PO releasing for assembler PCB’s.
6.Stickering sheet preparation for PCB’s BOM packing.
7.Offering Assembled PCBs to QC team.
8.Additional responsibilities assigned by reporting authority.
Integration BOM Team
1.Identification of Components and modules.
2.Full BOM kitting as per defined process.
3.Confirmation of existing Integration BOM availability of requested Module/ Sub System.
4.Planning and execution of Integration BOM packing.
5.Coordination with MRD team and QC team.
6.Additional responsibilities assigned by reporting authority.
Sample Assessment Questions
1.What is the charge stored in a 10μF capacitor when it is subjected to a voltage of 5V?
- A. 2μC
- B. 50μC
- C. 500μC
- D. 0.5μC
2.What is the power consumed by a device that draws 2A of current when connected to a 12V supply?
- A. 6W
- B. 12W
- C. 24W
- D. 48W
3.What is the typical forward voltage drop across a silicon diode when measured with the SMART SMD Tester?
- A. 0.3V
- B. 0.7V
- C. 1.2V
- D. 2V
4.If a 330Ω resistor measures 330kΩ with the SMART SMD Tester, what is the most likely issue?
- A. The resistor is functioning correctly.
- B. The resistor is faulty.
- C. The tester is set to the wrong measurement mode.
- D. The tester's battery is low.
5.If a DC/DC converter has an input voltage of 24V and an output voltage of 12V, what is the step-down ratio
- A. 1:1
- B. 2:1
- C. 1:2
- D. 4:1
6.What is the typical width of a Small Outline Integrated Circuit (SOIC) package?
- A. 3.9 mm
- B. 5.3 mm
- C. 7.5 mm
- D. 10 mm
7.How many pins can a micro BGA package typically accommodate?
- A. Up to 100
- B. Up to 400
- C. Up to 800
- D. More than 1000
8.What is the maximum current capacity of a 12 AWG copper wire in a typical household wiring application?
- A. 15 amps
- B. 20 amps
- C. 25 amps
- D. 30 amps
9.What is the value of an SMD resistor marked with "103"?
- A. 10 kΩ
- B. 10 Ω
- C. 1 kΩ
- D. 100 kΩ